How To Paint Newly Installed Plaster In Your House

Painting plaster is every homeowner’s dilemma. You need to know that painting a plaster is much different from painting an ordinary wall and there needs to be so much precaution to be taken on that front. More preparation and patience are required to paint plaster. There are also extra steps you need to take. Here is everything you need to know about painting plaster. 

Key Steps to Follow

  1. Leave it to dry

The first rule is to let the plaster dry properly. The surface is extremely permeable, i.e., it can soak up any moisture around real quick. To achieve a better finish you should let the new plaster dry. Type of the material the plaster is made of to the weather are factors that can affect your painting. The rule of thumb is that plaster takes up to 4 weeks to dry and it can be done faster only if you use a heater or opening the windows to let it dry. If you apply emulsion paint before the plaster is dried, the surface can peel off or crack.

  1. Mixing your paint

Uneven brush strokes are always an enemy. Painting a new plaster can be risky because there are chances of uneven brush strokes.  The next thing you should do to take care of this situation is to create your mist coat paint. Mist coat paint refers to the watered-down version of emulsion paint. It acts as your primer. Get some white emulsion paint, thin it out with some water and you are good to go. You can mix it in the ratio of 3 parts paint to one part water and it will work for your new plaster. If you do not fancy watered-down emulsion, plastering in Auckland provides different suggestions for sealers separately made for plasters. They are very effective. 

  1. Applying the Mixed Paint

The next step is to apply the mixed paint on your newly plastered wall. Prep the area properly before starting. Lay down the sheets, cover all the furniture, and duct tape around switchboards after covering it up with papers. When you start applying the mixture to the wall, you can see how easily it gets soaked up to the plaster. It seals the plaster and the extra moisture layer helps the paint to stick in such a way that you can get a professional look. If there is an uneven surface or something that needs to be fixed on the wall, then you should sand it or fill it before applying these coats. 

  1. Paint Your Top Coat

The final step is adding a topcoat. This is where the color comes in. You can paint your chosen color and start decorating your room. 

Leave a Reply

Your email address will not be published. Required fields are marked *